Strike rate is the number that tells you how fast runs are coming, and it appears in two forms that mean opposite things: for a batter it is runs per 100 balls, where higher is better; for a bowler it is balls per wicket, where lower is better. Both are easy to calculate and easy to get slightly wrong, usually by counting the wrong balls or by averaging strike rates instead of adding up the underlying runs and balls. This guide fixes both, then looks at what a “good” strike rate really means.
Batting Strike Rate: The Formula
Strike rate = (runs scored ÷ balls faced) × 100
A batter who makes 45 off 30 balls has a strike rate of 45 ÷ 30 × 100 = 150.00. Read it as “at this pace, 150 runs from 100 balls”. It is a rate, so it works for any innings length.
| Innings | Working | Strike rate |
|---|---|---|
| 45 off 30 | 45 ÷ 30 × 100 | 150.00 |
| 62 off 48 | 62 ÷ 48 × 100 | 129.17 |
| 18 off 25 | 18 ÷ 25 × 100 | 72.00 |
| 0 off 4 | 0 ÷ 4 × 100 | 0.00 |
To skip the arithmetic, the strike rate calculator returns batting and bowling strike rates, plus boundary and dot-ball percentages.
Which Balls Count as “Balls Faced”?
This is where hand-scored books drift apart. The usual convention:
- Counts as a ball faced: every legal delivery the batter faces, including dot balls, byes and leg-byes. The batter faced the ball even though the runs go to extras.
- Does not count: a wide. The batter is not credited with facing it.
- Varies by scorer: the no-ball. Some scorers and software count a no-ball as a ball faced, others do not. Check your league’s convention and use the same rule for the whole season so rates stay comparable.
A ball on which the batter is dismissed counts as faced. A batter who retires partway through keeps the runs and balls they had. For how each extra is recorded in the book, see our guide to cricket extras.
Strike Rate Is Not Run Rate
Run rate is a team measure in runs per over; strike rate is a batter measure in runs per 100 balls. They are the same idea at different scales: a team scoring at 8 runs per over is scoring 8 off every 6 balls, which is 133.33 runs per 100 balls. Multiply a run rate by 100 ÷ 6 to turn it into a strike rate. The run rate calculator handles the team side.
Combining Innings: Never Average Strike Rates
To get a season or career strike rate, add all the runs, add all the balls faced, divide once and multiply by 100. Averaging the individual rates gives a short, wild innings the same weight as a long one.
| Innings | Runs | Balls | Strike rate |
|---|---|---|---|
| Match 1 | 50 | 25 | 200.00 |
| Match 2 | 10 | 20 | 50.00 |
| Combined | 60 | 45 | 133.33 |
Averaging 200 and 50 gives 125.00, which is not the batter’s real rate because the first innings faced 25 balls and the second only 20. Adding runs and balls gives the right number every time. Note also that not-outs do not affect strike rate. They matter for batting average, where they are excluded from the dismissals, but strike rate only needs runs and balls. The season stats calculator does the adding up for a whole year.
Bowling Strike Rate: The Formula
Bowling strike rate = legal balls bowled ÷ wickets taken
It is the average number of balls a bowler needs to take a wicket, so lower is better. Four overs and two wickets is 24 balls ÷ 2 = 12.0. As with economy, convert part-overs to balls first: 3.4 overs is 22 balls, so 2 wickets in 3.4 overs is 22 ÷ 2 = 11.0, not 3.4 ÷ 2. Wides and no-balls are not legal balls, so they do not count towards the balls bowled. A bowler with no wickets has no defined strike rate; show a dash, not zero.
Bowling strike rate is the wicket-taking number. It sits beside economy (runs per over) and average (runs per wicket), and the three are linked:
Bowling average = economy × strike rate ÷ 6
Take 4-0-28-2: economy 7.00, strike rate 12.0, average 28 ÷ 2 = 14.00, and 7.00 × 12.0 ÷ 6 = 14.00. The identity shows the trade-off: a bowler can bring the average down by conceding less or by taking wickets more often. The full breakdown is in our economy rate guide, and the bowling average and economy calculator returns all three from one set of figures.
What Is a Good Strike Rate?
There is no official threshold. Public cricket statistics sites quote rough guides that disagree with each other, and they come from professional cricket:
| Format | Batting strike rate often called strong |
|---|---|
| T20 | Around 130 or more (some sources say 120+) |
| One-day (ODI) | Around 85 to 100 |
| Test | Around 50 or more is brisk (some sources say 40+) |
Treat those as rules of thumb only. They do not transfer to a 35-over Saturday league, an under-13 match or a slow pitch, where the whole competition may score at a different pace.
A Better Test: Strike Rate Relative to Your League
Compare the batter with the league’s overall strike rate, calculated by adding every batter’s runs and balls faced and applying the formula once. Then estimate the runs gained or lost:
Runs above average = (batter SR − league SR) ÷ 100 × balls faced
If the league strike rate is 105 and a batter scores at 130 across 40 balls, that is (130 − 105) ÷ 100 × 40 = 10 runs more than an average batter would have made from the same balls. The same method works in any format and any age group.
Why Strike Rate Alone Misleads
- Small samples. 12 off 4 balls is a strike rate of 300, and tells you almost nothing. Wait for a reasonable number of balls faced.
- Role and situation. An opener protecting wickets in the first overs and a finisher hitting from ball one are not doing the same job. The T20 strategy guide covers how roles differ.
- Stability matters too. A high rate with a low average can mean a batter who gets out quickly. Read strike rate beside average, not instead of it.
Common Mistakes
- Averaging strike rates instead of adding runs and balls (shown above).
- Counting wides as balls faced. They are not.
- Dividing a bowler’s overs written as 3.4 by wickets. Convert to 22 balls first; the over to ball converter does it in one step.
- Reading bowling strike rate the wrong way round. For a batter higher is better; for a bowler lower is better.
- Mixing conventions mid-season, such as counting no-balls as faced in some matches and not in others.
Worked Example: One Match, Both Sides
A batter makes 36 runs and faces 24 balls. Any wides bowled to them are not in that 24, but a ball that went for a leg-bye is: strike rate = 36 ÷ 24 × 100 = 150.00. Across the season the same batter has 412 runs from 331 balls: 412 ÷ 331 × 100 = 124.47. At the other end, a bowler takes 3 wickets for 21 runs from 4 overs: balls 24, strike rate 24 ÷ 3 = 8.0, economy 21 ÷ 4 = 5.25, average 21 ÷ 3 = 7.00; check 5.25 × 8.0 ÷ 6 = 7.00. To see where these columns sit on a full card, read how to read a cricket scorecard.
Getting Strike Rate Without the Arithmetic
If you score by hand, strike rate is the figure most often wrong in the book, because balls faced is easy to miscount over a long innings. Want to record this automatically during your next match? Score your match with CricPulse. Balls faced, runs and each bowler’s balls and wickets come from the same ball by ball record, so strike rates are always built from the right numbers. For season minimums and qualification, see club cricket averages and qualification rules.
Frequently Asked Questions
What is the formula for batting strike rate in cricket?
Batting strike rate = runs scored divided by balls faced, multiplied by 100. A batter who scores 45 off 30 balls has a strike rate of 45 divided by 30 times 100, which is 150.00. It tells you how many runs the batter would score per 100 balls at that pace.
What is bowling strike rate?
Bowling strike rate is the number of legal balls bowled divided by wickets taken, so it is the average number of balls a bowler needs for a wicket. Lower is better. A bowler who takes 2 wickets from 4 overs has bowled 24 balls, so the strike rate is 12.0.
Do wides and no-balls count as balls faced?
A wide is not a ball faced and does not count. Byes and leg-byes do count as balls faced, because the batter faced the delivery. No-balls are treated differently by different scorers, so check how your league or scoring software handles them and apply the same rule all season.
What is a good strike rate in T20, ODI and Test cricket?
Public cricket statistics sites give different rough guides, commonly around 130 or more as strong in T20, around 85 to 100 as strong in ODIs, and around 50 or more as brisk in Tests. These are loose rules of thumb rather than official thresholds. Compare a batter with the average for their own league and format instead.
How do you work out one strike rate across several innings?
Add up all the runs, add up all the balls faced, then divide runs by balls and multiply by 100. Do not average the individual strike rates. A 25-ball 50 and a 20-ball 10 give 60 runs from 45 balls, which is 133.33, not the 125.00 you get by averaging 200 and 50.
Does a not-out affect strike rate?
No. Strike rate only uses runs and balls faced, so being not out changes nothing. Not-outs matter for batting average, where they are left out of the number of dismissals.
How are strike rate, economy rate and bowling average connected?
Bowling average equals economy rate multiplied by bowling strike rate, divided by 6. A bowler with an economy of 7.00 and a strike rate of 12.0 has an average of 7.00 x 12.0 / 6, which is 14.00 runs per wicket.