A dot ball is a legal delivery from which no run is scored. That one-line definition covers most balls in a match, but not all of them. A leg bye is a dot for the bowler and not for the team. A wicket can be a dot. A wide never is. This guide sets out what counts, how to calculate dot-ball percentage for batters and bowlers, and why T20 analysts track dot balls as closely as boundaries.
What Is a Dot Ball?
A dot ball is a legal delivery on which the batting side scores no runs. The name comes from the scorebook: in the bowler’s over box the scorer writes a single dot for that ball, so a maiden over is six dots in a row. Broadcasters, apps and stats sites have since turned that mark into a statistic: dot balls faced for a batter, dot balls bowled for a bowler, and dot-ball percentage for both.
Two words in the definition carry the weight. Legal means wides and no-balls are out, because they are not part of the six balls of an over. No runs is where conventions split, because a ball can produce runs for the team without any runs being charged to the bowler or credited to the batter.
What Counts as a Dot Ball
| Delivery | Dot for the bowler? | Dot for the batter? | Dot for the team? |
|---|---|---|---|
| Legal ball, no run | Yes | Yes | Yes |
| Wicket, no run (bowled, caught, lbw, stumped) | Yes | Yes | Yes |
| Run out after a completed run | No | No | No |
| Runs off the bat | No | No | No |
| Bye or leg bye | Usually yes (not charged to the bowler) | Usually yes (nothing off the bat) | No |
| Wide | No (not a legal ball) | No (not a ball faced) | No |
| No-ball | No (not a legal ball, penalty charged) | Varies by stats provider | No |
The first two rows are agreed everywhere. The bye and leg-bye row is the one to watch. Byes and leg byes are fielding extras: they go in the team total but not against the bowler, and they are not the batter’s runs. So a ball that runs away for a leg bye is, for most bowling figures, a dot. A strict “nothing scored” count leaves it out. Neither is wrong, but when you compare dot-ball figures from two sources, check which convention each uses. The same logic decides whether an over with a leg bye can still be a maiden.
Wides and no-balls are never dots for the bowler, because the penalty run is charged to the bowler and the ball has to be bowled again. A no-ball still counts as a ball faced by the batter, which is why batting dot counts for no-balls differ between providers. For the detail on each, see the wide ball and no-ball guides.
A Worked Over, Ball by Ball
Bowler Smith bowls to batters A and B. B is bowled on the fifth delivery and new batter C comes in.
| Delivery | What happened | Faced by | Team runs | Charged to Smith | Bowler dot? | Strict dot? |
|---|---|---|---|---|---|---|
| 1 | No run | A | 0 | 0 | Yes | Yes |
| 2 | 1 off the bat | A | 1 | 1 | No | No |
| 3 | No run | B | 0 | 0 | Yes | Yes |
| 4 | Wide, no run taken | (not faced) | 1 | 1 | No | No |
| 5 | Bowled | B | 0 | 0 | Yes | Yes |
| 6 | 1 leg bye | C | 1 | 0 | Yes | No |
| 7 | 4 off the bat | A | 4 | 4 | No | No |
That is seven deliveries and six legal balls. The team scored 7. Smith’s line for the over reads 1-0-6-1: one over, no maiden, 6 runs (1 off the bat, the wide, and the four), one wicket.
- Bowler dot balls: deliveries 1, 3, 5 and 6, so 4 of 6 legal balls, a dot-ball percentage of 66.7%.
- Strict dot balls (nothing scored at all): deliveries 1, 3 and 5, so 3 of 6, which is 50%.
- Batters: A faced 3 balls (1 dot) for 5 runs. B faced 2 balls, both dots, for 0. C faced 1 ball, the leg bye, which is a dot under the “nothing off the bat” convention. The wide was faced by nobody.
Dot Ball Percentage: The Formula
Dot ball % = dot balls ÷ legal balls × 100
For a batter, the denominator is balls faced, which excludes wides. For a bowler it is legal balls bowled, which excludes wides and no-balls. A batter who faces 30 balls and scores off 18 of them has 12 dots, so 12 ÷ 30 × 100 = 40%. A bowler with 15 dots in a four-over spell has 15 ÷ 24 × 100 = 62.5%.
Why Dot Balls Matter: The Strike-Rate Link
Dot-ball percentage and strike rate are tied together by simple arithmetic. If a batter’s dot-ball rate is d and they average r runs from each ball they score off, then:
Strike rate = (1 − d) × r × 100
The table below works it through. It is why T20 coaches talk about “dot-ball pressure”: a batter who blocks half their balls needs to average 2.5 runs a scoring shot just to strike at 125.
| Dot ball % | 1.5 runs per scoring ball | 2 runs per scoring ball | 2.5 runs per scoring ball |
|---|---|---|---|
| 30% | 105 | 140 | 175 |
| 40% | 90 | 120 | 150 |
| 50% | 75 | 100 | 125 |
| 60% | 60 | 80 | 100 |
The same idea works for bowlers. Ignoring wides and no-balls, a bowler’s economy rate is 6 × (1 − d) × r. A T20 bowler who bowls 12 dots in 24 balls and concedes an average of 2 runs on the other 12 finishes 4-0-24-0, an economy of 6.00. Add three more dots and keep the same 2 runs per scoring ball, and the spell becomes 4-0-18-0, an economy of 4.50.
That is why dot-ball percentage is a standard line in T20 analysis. It shows how a batter got to a strike rate (by rotating the strike, or by hitting boundaries between long gaps) and it shows a bowler’s control even in a spell without wickets. Our T20 strategy guide covers how teams plan around it.
The Perfect Spell: 24 Dot Balls
A T20 bowler can bowl at most four overs, so 24 legal balls, and the most dot balls possible in a spell is 24. Lockie Ferguson did it for New Zealand against Papua New Guinea at the 2024 T20 World Cup in Tarouba, finishing with 4-4-0-3. It was the first four-maiden spell in a T20 World Cup, and only the second in men’s T20 internationals after Canada’s Saad Bin Zafar bowled 4-4-0-2 against Panama in 2021.
How Scorers Record Dot Balls
- Bowling analysis: one dot in the over box for each legal ball with no run charged to the bowler. Byes and leg byes are often marked with their own symbol instead of a plain dot, so the book shows the team runs without charging them to the bowler.
- Batting line: most scorebooks record only the runs a batter scores, so dots faced come from a separate balls-faced count. Some books have a column of boxes for it; others leave the scorer to tick it in the margin.
- The check: at the end of an over, dots plus scoring balls should equal six legal balls. If they do not, a wide or no-ball has probably been miscounted.
If you score on paper, the printable cricket scoresheet
gives each bowler the right number of over boxes for the format, and the
over notation decoder turns a line like
. 1 . 1wd W 1lb 4 into balls, runs and extras. To turn balls and runs into rates, use the
strike rate calculator or the
bowling average and economy calculator.
How CricPulse Fits In
Want to record this automatically during your next match? Score your match with CricPulse. Every ball goes in as a run, an extra or a wicket, and the scorecard’s team comparison shows each side’s dot-ball percentage next to run rate and boundaries, using the strict count: a legal ball with nothing scored. No counting dots in the margin, and no arguing about whether that leg bye counted. For the rest of the scorebook, see how to score a cricket match and the scorecard abbreviations guide.
Frequently Asked Questions
What is a dot ball in cricket?
A dot ball is a legal delivery from which no run is scored. It gets its name from the dot the scorer writes in the bowler’s analysis for that ball. A wicket on a ball with no runs is still a dot ball.
Is a wide a dot ball?
No. A wide always gives the batting side at least one run, and it is not a legal delivery, so it does not count as a ball bowled or a ball faced. The bowler has to bowl it again.
Is a no-ball a dot ball?
Not for the bowler: the no-ball penalty run is charged to the bowler and the ball is not a legal delivery. The no-ball does count as a ball faced by the batter, and stats providers differ on whether a no-ball with nothing off the bat is a dot for the batter.
Does a bye or leg bye count as a dot ball?
For the bowler, usually yes, because byes and leg byes are not charged to the bowler. For the batter, usually yes too, because nothing came off the bat. For the team, no: runs were scored. Different apps and stats sites use different conventions, so check which one a figure uses.
Is a wicket ball a dot ball?
Yes, if no runs were scored on it. A batter bowled, caught or lbw without a run counts as a dot for the bowler and for the batter. A run out where the batters completed a run before the wicket is not a dot.
How do you calculate dot ball percentage?
Divide dot balls by legal balls and multiply by 100. For a batter, use balls faced. For a bowler, use legal balls bowled. 12 dots in 24 balls is 50%.
What is a good dot ball percentage?
It depends on format and role. Lower is better for a batter and higher is better for a bowler. A useful check is the strike-rate link: if a batter scores two runs per scoring ball on average, a 40% dot rate caps the strike rate at about 120 and a 50% dot rate at about 100.
What is the most dot balls in a T20 spell?
A four-over T20 spell has 24 legal balls, so 24 dots is the maximum. Lockie Ferguson did it for New Zealand against Papua New Guinea at the 2024 T20 World Cup, finishing with 4-4-0-3. Canada’s Saad Bin Zafar had earlier bowled 4-4-0-2 against Panama in 2021.