A wide is a delivery that is too far from the striker to be hit with a normal cricket stroke. The umpire calls and signals it, the batting side is awarded one run, and the ball does not count as one of the six balls in the over. After the no-ball it is the most common extra in the game, and in T20 it is called far more often than most club players expect. This guide covers how a wide is judged, what it is worth, how a batter can still be out, what the 2022 Laws changed for leg-side wides and how to record every case in the scorebook.
What Is a Wide Ball in Cricket?
Law 22 of the MCC Laws of Cricket deals with the wide ball. The umpire calls and signals Wide when the ball is not within reach of the striker for a normal cricket stroke. The consequences are the same wherever it is bowled:
- One run is awarded to the batting side as a penalty, scored as a wide.
- The delivery does not count in the over, so the bowler bowls an additional ball.
- The batters can still run, and every run they complete is added to the wides.
- The batter can only be dismissed in a few ways (see below).
The umpire signals a wide by extending both arms horizontally. For the full set of signals and what each asks the scorer to write, see cricket umpire signals explained.
How Does an Umpire Judge a Wide?
The Law’s test is whether the ball is sufficiently within reach of the striker for the batter to hit it with the bat by means of a normal cricket stroke. Several practical points follow from that:
- The call is made when the ball passes the striker’s wicket. It cannot be called earlier, although the ruling then treats the delivery as a wide from the start of the delivery stride.
- The umpire judges the ball against where the striker is standing, not just the line of the stumps. Under the 2022 Laws the umpire also takes account of where the striker has stood at any time since the bowler began the run-up, because batters now move around the crease before the ball is bowled.
- The call is revoked if the striker hits the ball or it touches the striker before reaching a fielder, or if the delivery turns out to be a no-ball.
- Umpires can apply the stricter limited-overs interpretation to a bowler they consider to be bowling down the leg side as a negative tactic.
Most competitions publish a wide guideline in their playing conditions, often marked by lines on the pitch or by a bat-width test outside off stump. White-ball formats are normally called more strictly than Tests, but the exact line differs from league to league, so check yours. We do not quote a universal measurement here because there is none.
Leg-Side Wides
A ball down the leg side is the hardest wide to judge, because the batter can move into its line. The Laws handle that in two ways:
- The wide is judged with regard to where the striker stood at any time after the run-up began, as above, not only where they are when the ball passes.
- A ball that clips the batter’s pad or bat is not wide, because the call is revoked once the ball touches the bat or striker.
When the ball is down the leg side, passes the batter and is missed by the wicketkeeper, the batters can run. Those runs are wides, not byes. Leg byes only apply when the ball hits the batter’s body, which cancels the wide.
How Many Runs Is a Wide Worth?
| What happens | Team gets | Recorded as |
|---|---|---|
| Wide, no run | 1 | 1 wide |
| Wide, batters complete 1 run | 2 | 2 wides |
| Wide, batters complete 2 runs | 3 | 3 wides |
| Wide runs to the boundary | 5 | 5 wides (1 penalty + 4) |
| Wide clears the rope without touching the bat | 5 | 5 wides, never a six |
| Wide, wicketkeeper misses, batters run byes | 1 + runs completed | All wides, no byes |
| Wide, then a fielder’s overthrow | Penalty + runs run + overthrow runs | All wides |
The rule scorers learn first: every run that comes from a wide delivery is a wide. It never turns into a bye or a batter’s run. Some competitions award a larger penalty than one run, but one is the default in the Laws and in international cricket.
A wide can only be a bye-type extra if it is not a wide at all. If the ball is within reach, passes the bat and the keeper misses it, those are byes, which are not charged to the bowler.
Can You Be Out on a Wide?
Yes, but only in a few ways. Under the 2022 Code of Laws, once a wide has been called the batter can be out only by:
- Stumped (the keeper breaks the wicket while the batter is out of the crease; see our stumping guide)
- Run out
- Hit wicket
- Obstructing the field
Bowled, caught and LBW are not available once a wide has been called (if the ball touches the bat or striker, the wide is revoked and the delivery is scored as a normal ball). The stumping is the classic case, a batter who steps out and is beaten by a wide. For the other dismissals, see rare cricket dismissals.
The October 2026 edition of the Laws includes clearer definitions around wides among its changes, and clause numbers may differ from those quoted here. Our summary of the new edition is in MCC Laws of Cricket 2026: what changed for scorers.
Wide vs No-Ball: What Is the Difference?
| Wide | No-ball | |
|---|---|---|
| Cause | Ball out of the striker’s reach | Illegal delivery (foot, height, fielding and so on) |
| Penalty | 1 run | 1 run |
| Counts in the over? | No | No |
| Runs off the bat | Not possible (hitting it cancels the wide) | Credited to the batter |
| Runs after a miss | Wides | Byes or leg byes on top of the no-ball |
| Dismissals | Stumped, run out, hit wicket, obstructing the field | Run out, hit the ball twice, obstructing the field |
| Next ball a free hit? | No | Yes in T20 and ODI |
The no-ball is covered in full in no-ball in cricket explained. If the free hit is itself a wide, the free hit carries over, as set out in the free hit guide.
How Scorers Record a Wide
- Write Wd (or a circle with a W, depending on your book) in the ball-by-ball section.
- Add the penalty run and any runs completed to the wides column of the extras.
- Charge all of it to the bowler’s runs conceded.
- Do not count the delivery as a ball in the over, so the over stays open.
- Do not count it as a ball faced for the batter, unless your competition says otherwise. Apply one convention all season.
The full extras line on a scorecard is explained in cricket scorecard abbreviations, and the scorebook balance checker will confirm the extras add up.
Worked Example: An Expensive Over
An over in a club game goes: a dot, a wide that runs to the boundary, a four off the bat, a wide on which the batters run 2, a wide where the keeper stumps the batter, and a single. How many balls were bowled, what did it cost and what happened?
- Dot: 0 runs. Legal ball 1.
- Wide to the boundary: 5 wides. Not counted in the over.
- Four off the bat: 4 runs to the batter. Legal ball 2.
- Wide, 2 runs run: 1 + 2 = 3 wides. Not counted.
- Wide, stumped: 1 wide and a wicket. Not counted.
- Single: 1 run. Legal ball 3.
Six deliveries were bowled but only 3 legal balls. The team scored 0 + 5 + 4 + 3 + 1 + 1 = 14 runs: 5 off the bat and 9 wides (5 + 3 + 1). The bowler is charged all 14 runs, and the stumping is credited as a wicket to the bowler. The over still has three legal balls to go.
Why Wides Matter for Strategy and Stats
Wides inflate the bowler’s economy rate and the opposition’s total without a single ball being hit. A bowler who sends down three wides in an over has bowled a 9-ball over in effect, and in a short format that extra length is meaningful. See economy rate explained for how the runs and overs combine, and use the overs to balls converter when an over contains extras. Over-rate rules also treat wides carefully, as covered in over-rate penalties in club cricket.
Recording Wides Automatically
The wide is easy to get wrong because it changes the extras column, the bowler’s figures and the over count at the same time. Want to record this automatically during your next match? Score your match with CricPulse and a wide adds the penalty run, keeps the over open and charges the bowler correctly.
Frequently Asked Questions
What is a wide ball in cricket?
A wide is a delivery that passes so far from the striker that it could not be hit with the bat by a normal cricket stroke. The umpire calls and signals it, the batting side gets one penalty run, and the ball does not count as one of the six balls in the over, so the bowler has to bowl it again.
How many runs is a wide worth?
A wide is worth at least one run. Any further runs the batters complete are added and all of them are recorded as wides, so a wide plus two completed runs is 3 wides. A wide that runs to the boundary is 5 wides, one penalty run plus four for the boundary.
Can a wide go for six?
Not as a wide. A six is only awarded when the ball is hit by the bat, so a wide that clears the rope without touching the bat is scored as 5 wides. If the batter does hit it, the wide is revoked and normal scoring applies.
Can you be out on a wide?
Only in limited ways. Once a wide is called, under the 2022 Code of Laws the batter can be out stumped, run out, hit wicket or obstructing the field. Bowled, caught, LBW and the other modes are not available.
What is a leg-side wide?
It is a wide called for a ball that passes down the leg side too far from the batter to be hit with a normal stroke. Since the 2022 Laws the umpire judges this against where the striker stood, or had moved to, after the bowler began the run-up, and umpires apply a stricter interpretation to bowlers who bowl down the leg side as a negative tactic. In white-ball cricket the practical test is stricter than in Tests.
Is a wide charged to the bowler?
Yes. Wides, including every run completed off them and any boundary, are recorded as wides and charged to the bowler’s figures. That is the opposite of byes and leg byes, which are extras but are not charged to the bowler.
Is there a free hit after a wide?
No. A free hit follows a no-ball, not a wide. But if the delivery bowled during a free hit is itself a wide, the free hit carries over to the next ball. Free hits exist in international white-ball cricket and many leagues, not in all club cricket.